Before : After






Final Fitting

Today I was able to finish fitting this 1970 Aluminum Boats and Canoes Inc 11′ 4″ rowing skiff.  I’m very pleased with this primer/paint.  After clunking around installing these seats it at no time scratched.  Removable seat configuration was also added…








This morning started out with this: primed, lightly scoured with a fabric pad to sand the worst of the grit, and vacuumed…



The paint I used was Uno-HD along with its hardener, Uno DH 46.  These, like the 5-Star primer, were excellent with which to work.  But the greatest surprise of all was my purchase of the Anest Iwata AZ3HTE2 centre post gravity air spray gun (Italy).  In the past I have gotten along with $40 spray guns from Princess Auto.  My supplier (a professional auto body wholesale/retailer) talked me into it, but said it would be worth it…and boy is it worth it!  I will never go back to a cheap air gun again!!!  It was pricey, especially as it was only – in my mind – for a duck boat, but it made a most beautiful application…atomized, even, ergonomic, easy to use and clean up…


Here’s the paint formula.  And again Uno-HD looks like it will be very durable…easy application/cleanup…great colour…olive drab dull.  This man supplies the same mix for CF application on their motorized equipment.


And here’s the result after three or four coats, inside and out.  One quart of paint with a corresponding ratio of hardener went on smooth and dried quickly…





…am I happy.  I will leave it for a day and then start installing seats.


Today the weather warmed to 27C; it only needed to be 17C in order to prime the boat.  I hauled it outside and mixed the primer. I used 5-Star Xtreme primer #5424.  It is a hybrid of epoxy and acrylic polymers, which provide excellent adhesion, good corrosion resistance, productive dry times, and ease of sanding.  It was mixed with an activator (#5426), and a reducer (UE60), at a ratio of 4:1:2.  I applied many light coats at intervals of 20 minutes.  The pot life of the mix is 1 – 2 hours at 77F. ( Here is the first coating.  Recoating can be done at 20 minute intervals….



…this is as it was at the end after several coats with a fine spray at 50# pressure…



…and here are the engine housing and the underside of the seats…


DSC00092 Drying overnight it will be ready for the paint tomorrow, although it is supposed to be overcast and rainy.

Grinding Professional Dog Food (Again)

contentIf you want better food, fresher food, and less expensive food for your dog, then grind your own.  It takes me 15 minutes to grind a month’s worth of grain.  This is a professionally balanced ration made of fresh food.  My B.S. was in Animal Science; I was university trained to do this.  There is now a computer program that will allow any enterprising dog owner to easily do the same.   It comes with a program on DVD.  Spend a couple nights reading up.  Animal Feeds, Feeding and Nutrition, and Ration Evaluation, by Tisch.  Start experimenting with the formulas based on what you have available.  It’s all you need to do.  Cook up a batch every couple of days and keep it in the fridge.

I have the following ingredients readily available, most at almost no cost to myself: fish, meat (usually venison), dried skim milk, alfalfa, hard winter wheat, oats, barley, calcium carbonate, corn oil, mineral supplement, and vitamin B12 supplement, and that’s it.

30#, 5 gallon bucket of ground grain mix…one month’s worth @ 1#/day, 1/2# in morning and 1/2# in the evening (VitaMix used as grain mill)

No matter where you live you will be able to find them if you look hard enough.  It costs me twenty cents a day for the best food your dog will ever get – you aren’t paying for preservatives, shipping, costs of running a grocery store or worse yet, a vet clinic.  And don’t let your vet sell you a supposedly superior commercial product if it puts money in their pocket, all they while they’re telling you that it’s for your dog’s welfare.  If they’re that compassionate and like my dog that much then they should be giving it to me for free, right?

The pet industry uses any source of feed as long as it meets needed nutritional component requirements.  When a bag advertizes ‘chicken’, these are rendered chickens, birds that have died, or are diseased, or sickly, and are processed at high pressure and temperature to sterilize any disease or bacteria that they may be carrying.  The same is true for beef or lamb, etc..  Dog food producers do not slaughter fresh, whole, human-destined animals for your dog.  I butcher my own animals so the meat they get are trimmings off my own work.

Do your pet a favour, and make your own; do your pocketbook a favour, put your money into something that’s worth it.

According to Tisch here’s what is daily required for the age of my dog and his activity level measured in pounds:

Fish – .05, meat – .1, skim mild – .05, alfalfa – .075, wheat – .4, oats – .4, barley – .3, egg shell – .01, corn oil – .05, mineral salt – trace, vitamin B12 – trace.

My retriever firmly prefers this feed to any commercial one set before him.  And why wouldn’t he?

I grind my feed with a vitamix on low so as not to heat the grain, and wait until it enters the flour stage, standing up against the wall of the container.